![mTune SMARTflash m380 / M400R / 400X [Mk3 Focus RS] Upgrade kit mountune](http://www.mountune.com.au/cdn/shop/products/mtune_smartflash_380400rx_2048x.png?v=1692368626)
2536-SF400-AA
The mountune m380, m400r and m400x provides includes three performance calibration solutions for owners of Mk3 Focus RS looking for an ultra-convenient performance upgrade solution for their potent 2.3-litre EcoBoost engine, safely raising their power and torque output; improving performance and drivability, whilst adding a host of functionality, unique to mountune.
As with all mountune upgrades, all three of the performance calibrations have been through our own stringent durability testing criteria, which included additional months of in-cylinder pressure monitoring to ensure engine robustness, whilst retaining all safety parameters, so you can have complete peace of mind. This upgrade is also supplied complete with a standard calibration too.
The mTune SMARTflash app allows you to easily DIY install and update calibrations to your ECU using nothing more than our app, the supplied Bluetooth OBD interface and your Smartphone; no laptop, no wires, no handsets, no problem!
Once you've selected one of the three performance calibrations and installed it from the SMARTflash app, you'll be able to switch between the regular version and the + version of that calibration by pressing and holding the 'cancel' button on the steering wheel.
With any of the calibrations installed, you'll also be able to adjust the torque output in preset incremental torque demands using the plus and minus buttons on the steering wheel.
The latest version of SMARTflash also provides additional functionality, such as: adjustable launch control, fully configurable gauge displays using the OBD data-stream, comprehensive data-logging and a built-in performance meter, too.
Please see the table below for the full list of functionality that comes as standard with this upgrade option.
For assistance setting up and installing SMARTflash V2, please refer to the user guide, here.
All three performance calibrations are supplied as part this upgrade and provide a very noticeable and useable uplift in power and torque across the entire rev-range.Compared to the standard vehicle it's quite literally on another level and m380, m400r and m400x are all easily changed in seconds using nothing more than your smartphone and our OBD Bluetooth adaptor.
Please note: 97RON+ fuel should be used with m400x. If this is not available, the m380 or m400r calibration should be utilised to maintain reliability.
Individual vehicle output may vary based on vehicle condition, external parameters and method of testing.
Important: In order to achieve and maintain performance and reliability, the m380 m400r and m400x calibrations should be used in conjunction with the hardware listed below. To achieve peak performance figures 97RON+ fuel should be used, however, m380 and m400r remain perfectly safe to use everyday on 95RON fuel, 97RON+ should be used when running m400x.
Recommended m380 hardware:
Recommended m400r hardware:
Recommended m400x hardware:
The phone device is shown for illustration of SMARTflash app only, and is not included with this product.
Please Note: The warranty of the vehicle being updated with this upgrade may be affected. The m400X upgrade kit is not Ford-endorsed.
To maintain any warranty provision otherwise entitled to you, and to ensure correct operation and reliability, calibrations loaded via the SMARTflash app should be installed together with the correct mountune® hardware.
NOT COMPATIBLE with vehicles in North America. Please visit mountune USA website for compatible Focus RS products - www.mountuneusa.com
